Tool Condition Monitoring and Metrology Demonstrations

Date: April 8, 2008

Time: 8:30 AM-10:30 AM; 11:00 AM-1:00 PM; 1:30 PM-3:30 PM

Tool Conditioning Monitoring: Tool Condition Monitoring helps you save tooling, reduce your scrap and machine downtimes. Typical savings varies between 10% and 40% reduction in costs

Machine Tool Metrology: Machine Tool Metrology will help to identify and correct geometric and dynamic errors in the machine tools.

The session will incorporate live demonstrations of the technologies on the smart machine test bed. These two-hour sessions at TechSolve, Cincinnati are open to any executive, but each session is limited to 15 attendees. There is no fee for this event, but pre-registration is required.

No comments: